Juniper Systems Allegro CX Manual - Manual (Page 84)

84 Allegro CX Owner’s Manual
The Automatically Suspend option sets the amount of time the Allegro
sits idle, after the backlight turns off, before the Allegro goes into
suspend mode.
Note: Remember that when setting these times the suspend time starts
to countdown to suspend after the backlight has turned off. If the Switch
state to System Idle is set to three minutes (the default for Battery Power)
and the Switch State to Suspend option is set to fi ve minutes (the default for
Battery Power) it takes eight minutes of sitting idle before the Allegro goes
into suspend mode.
Regional Settings
Changes made in the Regional Settings Properties applet mainly affect
programs that support international settings. In this applet, you can
change how these programs are displayed and how the numbers,
currency, time, and dates are sorted.
Regional Settings
The Regional Settings tab is used to set the location on the earth that
you are using the Allegro, and allows you to set the language of the
Allegro’s interface.
‡