Juniper Systems Allegro CX Manual - Manual (Page 226)

226 Allegro CX Owner’s Manual
Transceiver: Class 2 Bluetooth
Range: 30 foot (10 meter) radius
Integrated: Built into the Allegro; does not occupy the PC Card
slot
Internal Expansion Ports
COM 3: Internal expansion bus connections, full modem control
signals, signal levels 0 to 3.3V straight from UART, no buffering,
ring signal causes unit to resume from a suspend state
Expansion Port: Contains low 3 address bus signals, low 8
bit data bus, bus control signals, COM 3 signals, and general
purpose input/output (GPIO) signals
Color Display
High visibility color TFT active matrix transflective LCD, .24 mm
dot pitch, .23 mm dot size
1/4 VGA, 320 x 240 pixels, landscape view
Transflective technology for brilliant contrast, including use in
direct sunlight
Includes MX1178 graphic accelerator for high performance
operation
LCD has an LED backlight with adjustable brightness capability
for visibility in low lighting or changing light conditions
Color TFT technology allows operation in cold temperatures
without a heater
Active viewing area: 3.0” wide x 2.3” high (3.8” diagonal)
Two onboard mini stylus and a full size stylus
Touchscreen disable button allows you to clean the screen or
operate unit in heavy rain
Touchscreen transmissivity of 84%, non-reflective
Monochrome Display
High visibility LCD with paper white-like background, black on
white, high contrast, .26 mm dot pitch, .25 mm dot size
1/4 VGA, 320 x 240 pixels, landscape view
Transflective technology for brilliant contrast, including sunlight
LCD has an LED backlight with adjustable brightness capability
for visibility in low lighting or changing light conditions
LCD has extended temperature rating for operation in cold or hot
environments



▲


▲










▲




