Juniper Systems Allegro CX Manual - Manual (Page 111)

Allegro CX Owner’s Manual 111
Unsuccessful Connection
If the connection was not successful, the following screen appears on
the PC:
From here, click on the Next button on the Your device was not detected
screen and the Getting Connected screen appears again. Repeat the
connection instructions for the COM port you are using until a
successful connection is made.
Establishing Additional ActiveSync Connections
If you already have ActiveSync installed on your desktop PC and
have successfully connected your Allegro to your desktop PC,
complete the following steps:
Note: These instructions are also designed for all additional connections
between the Allegro and desktop PC using ActiveSync. You do not need to
set up the communication settings each time, as described in Establishing a
First Time Connection Using ActiveSync.
Turn on your Allegro and your desktop PC.
Connect the communication cable to the ports you set up on each
computer during the fi le transfer program installation process.
▲
‡
1)
2)