Juniper Systems Allegro CX Manual - Manual (Page 125)

Allegro CX Owner’s Manual 125
Remote Allegro File Maintenance
You can perform many convenient Allegro fi le maintenance
operations remotely from the desktop PC using ActiveSync. Move,
copy, and delete fi les from the Allegro window simply by dragging
and dropping them or by using the cut and paste functions. You
cannot start programs remotely. If you double-click on an executable
fi le, the properties of that fi le are shown.
Disconnecting
When you are fi nished transferring fi les between the Allegro and
the desktop PC, disconnect the Allegro by double-tapping on the
Connected symbol located in the status box on the Taskbar.
The Connected to ‘USB (this varies depending on the COM port you
are using for your ActiveSync connection) window pops up. Tap
on the Disconnect button. If you are using a serial port, you can now
disconnect the communication cable.
Note: In addition to the steps outlined previously, the following actions
cause the Allegro to disconnect from the desktop PC:
- Turning the Allegro or the desktop PC off
- Disconnecting the communication cable
- Misaligning the IrDA ports while using infrared
communication
- Removing the Allegro from the USB/Power Dock
‡