beautypg.com

Troubleshooting, New partnership setup – Juniper Systems Allegro CX Manual User Manual

Page 113

background image

Allegro CX Owner’s Manual 113

Troubleshooting

If you have any problems establishing communication between the
Allegro and the desktop PC, check the communication settings on
both computers and make sure the communication cable is fi rmly
connected to the correct ports. Refer to the installation instructions
for ideas on settings to review.

New Partnership Setup

After you have successfully connected the Allegro to the desktop PC
the following screen appears:

You can select Yes to set up a partnership or No to connect as a guest.
The advantage to setting up a partnership is that each time you
connect the Allegro to the desktop PC you are not asked which type
of connection you want. The Allegro automatically connects as a
partner.

If you select Yes, continue on to the Setting Up a Partnership section.

If you select No, the Allegro automatically connects to the desktop
PC as a guest, read the Connecting as a Guest section later in this
chapter for additional information.