Juniper Systems Allegro CX Manual - Manual (Page 214)

214 Allegro CX Owner’s Manual
Phone
The Phone tab enables you to select the phone port device that is
automatically connected to when the Bluetooth communication
program uses a Bluetooth phone port device.
Tap on the down arrow next to the My favorite phone: box to access a
drop-down box of all available phone port options. Tap on the phone
port device you are using as your favorite.
Select one of the following two options that work best for your
Bluetooth phone port needs:
Use the favorite selected above. This option automatically uses
the My favorite phone: port device that you selected.
Don’t use a favorite – prompt me with a list of suitable devices
instead. This option searches all accessible phone ports around
you and gives you a list that you must select from before a phone
port connection is made.
Note: If no phone port is available the phone option defaults to Don’t
use a favorite – prompt me with a list of suitable devices instead.
Tapping on OK saves any changes made. Tapping on the X closes the
Properties screen and returns you to the Bluetooth Devices screen.
‰
‰
‡