Juniper Systems Allegro CX Manual - Manual (Page 19)

Allegro CX Owner’s Manual 19
Shifted Options
The shifted options and the associated key sequences are listed
below.
Option Key Sequence
Function keys F6, F7, F8, F9
and F10
BLUE key + desired function key
Function keys F11 and F12 GOLD key + desired function key
Enable/Disable touchscreen BLUE key + TS
View Windows CE Start
Menu
BLUE key + Start
Page up BLUE key + PgUp
Page down BLUE key + PgDn
End BLUE key + End
Home BLUE key + Home
Toggle caps lock on and off BLUE key + CapLk
Toggle display backlight GOLD key + F3 (see gold light bulb
symbol above function key)
Display Contrast Lighten
(monochrome display only)
GOLD key + F4 (see gold symbol
above function key)
Display Contrast Darker
(monochrome display only)
GOLD key + F5 (see gold symbol
above function key)
Perform a reset On/Off (hold down for eight
seconds)
Keyboard Options
The following keys and key sequences are functional in Windows
.NET.
On/Off (Warm and Hard Reset)
This key is used to turn the Allegro on and off. The ridge around
the key helps prevent the Allegro from being accidentally turned on
without your knowledge.
A warm reset is performed by holding down the On/Off key for
about eight seconds. Release the key when the reset process begins.
A hard reset is performed by holding down the On/Off key for about
eight seconds. When the reset process begins, continue holding the
On/Off key down for an additional eight seconds. A hard reset does
erase the RAM memory.
▲