Juniper Systems Allegro CX Manual - Manual (Page 202)

202 Allegro CX Owner’s Manual
General
The General tab displays the following My Bluetooth Device Manager
settings:
Friendly Name: The name that is made available to other devices,
such as My CX.
Bluetooth Address: The unique 48-bit electronic address of your
Allegro CX.
Discoverable: Makes your Allegro CX visible to other Bluetooth
devices.
Connectable: Toggles whether or not your Allegro is able to accept
incoming connections.
Use Authentication: Requires a passkey from the remote device
trying to bond (pair) with the Allegro.
Use Encryption: Causes the Bluetooth connection to be encrypted to
enhance security.
Firmware: Shows the fi rmware version of your Bluetooth hardware.
Select the Discoverable and Connectable options so a checkmark
appears in each box. These settings allow other Bluetooth enabled
devices, which have the capability to do a device discovery (such as
a computer or another fi eld computer), to fi nd your Allegro.
Uncheck the Discoverable box if you only need the Allegro to fi nd
other Bluetooth devices and do not need the Allegro to be found by
another computer when they do a device discovery. This setting may
conserve battery life.