Juniper Systems Allegro CX Manual - Manual (Page 21)

Allegro CX Owner’s Manual 21
Right Mouse Click
There are two ways to achieve a right mouse click, you can press
the Alt key and touch the screen with a stylus, or touch and hold
the stylus in one spot on the touchscreen. In many Windows CE
programs, when you right click on an item a menu is displayed
listing functions and options that pertain to the item.
Cleaning the Keyboard
Dirt and debris can get underneath the keyboard bezel. To clean, use
a coin (do not use a screwdriver) to pull the bezel up at the recess
located at the bottom of the keyboard and remove it.
We recommend that you use warm water, mild detergent, and a
toothbrush to clean the keyboard or simply brush it out. The Allegro
remains sealed during this process.
Note: Do not direct a high pressure stream of water at the keyboard to
clean it. This action could break the seal, causing water to get inside the
Allegro.
Reattach the bezel by carefully inserting the top ridge under the
function keys and lowering the bezel down flat onto the case. Press
down along the sides while aligning the keys through the holes.
Note: After you reattach the bezel, check each key to make sure it is
completely free from the bezel. If any part of a key is caught underneath
the bezel, you may not be able to turn the Allegro on or you may hear a
continuous string of beeps.
In some environments, the Allegro is exposed to substances, such as
pitch or tar, which require stronger cleaning supplies for removal.
Some of the available cleaning supplies/chemicals on the market
will damage the case, so use caution. To see a current list of cleaning
supplies we have test and recommend for cleaning the Allegro, visit
our Web site at, www.junipersys.com. Go to the Support section and
do a search for “cleaning supplies.”
▲

