Juniper Systems Allegro Top Mounting Bracket User Manual
Installing the top mount bracket on the allegro
Installing the Top Mount Bracket on the Allegro
The top mount bracket for the Juniper Systems Allegro can be used
in a variety of mounting applications. Originally designed for a GPS
antenna mated with a separate GPS receiver system, it can also be
used with Bluetooth devices like barcode scanners, RFID readers, and
standalone GPS devices.
Installing the top mount bracket on the Allegro is a simple seven-step
process. To complete this, you will need a thin, narrow, metal object.
Caution: Do not use a sharp knife as this could damage the case.
1. Remove the existing on-board stylus from the top of the Allegro.
Figure 1: Remove stylus from Allegro
2. Loosen the thumbscrews on the bracket until the nuts reach the
top of the threads. It is not necessary to remove the nuts.
Figure 2: Loosen thumbscrews.
3. Place the mount in position at the top of the Allegro with the
flat face of the mount close to the same plane as the Allegro’s
display. See Figure 3.
- Allegro 2 Quick Start (1 page)
- Allegro 2 User Guide (119 pages)
- I/O module Allegro 2 (1 page)
- A2 Ethernet Dock (2 pages)
- A2 Ethernet Multi Dock (2 pages)
- Allegro MX User Guide (96 pages)
- Allegro MX Quick Start (1 page)
- AMXU GPS Expansion Pod (12 pages)
- Holux M-215+ for Allegro (2 pages)
- Holux GR-213 for Allegro (2 pages)
- Trimble Lassen GPS Expansion Pod (11 pages)
- Barcode Expansion Pod (22 pages)
- USB/Power Dock Pogo Pin (1 page)
- 12449 Alkaline (1 page)
- Allegro DAQ (28 pages)
- Allegro Desiccant Kit (5 pages)
- Allegro CX and CE Bluetooth CF Card (32 pages)
- Allegro CX Manual (304 pages)
- Allegro CX Quick Start (6 pages)
- Allegro DOS Manual (166 pages)
- Allegro DOS Manual (274 pages)
- Allegro DOS Quick Start (4 pages)
- Allegro DOS Quick Start (2 pages)
- Allegro CE Manual (292 pages)
- Allegro CE Quick Start (2 pages)
- Archer 2 User Guide (1 page)
- Archer 2 User Guide (133 pages)
- Archer 2 Quick Start (1 page)
- I/O module Archer 2 (1 page)
- Bumper kit Archer 2 (1 page)
- Handstrap kit Archer 2 (1 page)
- ikeGPS (16 pages)
- Archer Quick Start (2 pages)
- Archer Reference Guide (153 pages)
- Archer User Manual (384 pages)
- XF101 (2 pages)
- Travel Charger for the Ultra-Rugged Field PC (8 pages)
- Field PC Cap Replacement (1 page)
- Replacing the Communications Module on the Field PC (2 pages)
- ltra-Rugged Field PC Extended Caps (16 pages)
- Socket Bluetooth Card (6 pages)
- Mesa User Guide (112 pages)
- Mesa Addendum (1 page)
- Mesa Quick Start (2 pages)