Juniper Systems Allegro CX Manual - Manual (Page 58)

58 Allegro CX Owner’s Manual
Program and Data Storage Options
The Allegro CX has two options for storing programs and data:
internal non-volatile data storage and a PC card slot for memory
cards.
Storage Labels
To view the different storage locations by their name, complete the
following steps:
Turn on the Allegro.
Double-tap on the My Computer icon on the desktop of your
Allegro. The data storage options are designated as follows:
Folder Type of Storage
C_Drive Internal non-volatile
data storage
Storage Card
(shown only if a
card is installed) PC Card
My Document RAM
Program Files RAM
We recommend you use the internal non-volatile data storage
as your primary storage area. This is because the information is
retained without power. (ATA Flash and Compact Flash cards are
also non-volatile.)
Internal Non-Volatile Data Storage
The Allegro CX has a solid state storage drive used to store programs
and data. It can be read from and written to just like the hard
drive on a PC. The solid state internal storage is non-volatile so
information stored on it is retained even when no power is supplied
to the Allegro. The solid state storage is an internal drive and is not
user accessible.
PC Cards
The Allegro CX has a user-accessible PC card slot (PCMCIA 2.0 Type
II) that allows you to add mass data storage to you Allegro with PC
cards.
▲
1)
2)
▲
▲