Juniper Systems Allegro CX Manual - Manual (Page 25)

Allegro CX Owner’s Manual 25
System Tray Indicators
System tray indicators specify applications that are running on your
Allegro. The indicators are located in the bottom right corner system
tray.
These system tray indicators are active while the Allegro is running
specifi c tasks. These indicators provide you with the following
information:
System Tray
Indicators Indicator
Description
Remaining Battery Charge Status: shows the
percent of charge remaining in the batteries.
External Power Input: indicates that you are
connected to an external power source and not
drawing power from the internal batteries.
Charging Indicator: appears in the system tray
while the rechargeable batteries are being charged.
Data Storage Idle: outlined when the solid state disk
is idle and not being read from or written to.
Data Storage Active: darkens when data are being
read from or written to the solid state disk.
PC Card: indicates that a PC card is installed in
your Allegro.
PC Card Activity: darkens to indicate that the
application program is accessing the PC card (do
not remove the card when this icon is darker).
Caps Lock On: appears when the all capital letters
option is activated.
Touchscreen Disable: appears when the touchscreen
is disabled.
PC Connection: appears when there is an active
connection between the Allegro and the desktop
PC.
Bluetooth Connection: appears when Bluetooth is
being actively used on your Allegro.
Heater: appears when the touchscreen heater turns
on (this is applicable with monochrome screen
only).