Juniper Systems Allegro CX Manual - Manual (Page 269)

Allegro CX Owner’s Manual 269
Code ID
The scanner is capable of returning a Code ID character(s) for the bar
code that is scanned. If a Code ID is selected, the Code ID character(s)
is placed before the bar code data and the prefi x character (if
enabled).
There are two types of Bar Code ID’s: Symbol and AIM. The Symbol
Code ID is a single character code. The AIM Code ID contains three
characters, a bracket (“]”) is followed by a code character and a
modifi er character.
Symbol Code ID
A = UPC-A, UPC-E, UPC-E1, EAN-8, EAN-13
B = Code 39, Code 32
C = Codabar
D = Code 128, ISBT 128
E = Code 93
F = Interleaved 2 of 5
G = Discrete 2 of 5, or Discrete 2 of 5 IATA
J = MISI Plessey
K = UCC/EAN-128
L = Bookland EAN
M = Trioptic Code 39
N = Coupon Code
Prefi x and Suffi x
The Prefi x, Suffi x 1, and Suffi x 2 character selection pull-down
window lists the characters that can be used as a prefi x or suffi x.
Only the prefi x or suffi x pull-down windows that are enabled are
shown. The prefi x and suffi x options are:
Option Description
None No function is performed.
= Line Feed, which moves the cursor down to
the same column on the next line.
= Carriage Return, which causes the cursor to
move to the left margin, often used with line feed to
start a new line of output.
= Line Feed, which moves the cursor down to
the same column on the next line.