Juniper Systems Allegro CX Manual - Manual (Page 258)

258 Allegro CX Owner’s Manual
GPS Data Formats
In the GPS Pod Setup program, you can set up the receiver in either
the TSIP or NMEA GPS data format.
TSIP Format
The TSIP is the default setting for the GPS pod. The settings are
COM Port: COM3, Protocol: TSIP, Baud: 9600, Parity: None, Data Bit:
8, Stop Bit: 1.
NMEA Format
The NMEA format does not have any default settings and must be
selected manually.
When NMEA is selected, you have the ability to enable or disable
certain NMEA packet types.
After the settings have been selected, tap on the Apply Settings
button to save the new settings. Tap on the Get Settings button to
bring up the GPS pod current settings to double check them.
▲