Juniper Systems Allegro CX Manual - Manual (Page 219)

Allegro CX Owner’s Manual 219
OBEX for Allegro CX
If you are using the Allegro CX, download the OBEX add-on
program from Socket Communication’s Web site at:
ftp://ftp.socketcom.com/bluetooth/BTCEobexENG120H.exe.
OBEX for Allegro CE using Windows CE .NET 4.1
If you are using an Allegro CE with Windows CE .NET 4.1, the OBEX
add-on program is included with the custom Bluetooth drivers.
These drivers are available for download from Juniper System’s Web
site at:
http://www.junipersys.com/fi les/AllegroBluetoothCE41.exe.
Bonding Bluetooth Devices
Once the OBEX add-on program is installed on the Allegro, create
a bond between the Allegro and the other Bluetooth device. If you
have not previously created a bond, refer to the Creating a Bond
section in this document for instructions.
Selecting Bluetooth Shared Folder
The Bluetooth Shared Folder is the root directory that a Bluetooth
device sees when using the Browse Remote Device utility.
Transferred and synchronized fi les on your Allegro appear in the
Bluetooth Shared Folder. This folder is located at My Documents |
Bluetooth Shared Folder by default.
The Bluetooth Shared Folder can be changed by following these
steps:
Tap once on the Bluetooth icon in the Allegro’s system tray (in
the bottom-right corner of the Allegro display). A pop-up menu
appears.
Select the Advanced Features menu selection, and then My
Bluetooth Device.
Tap on the Object Sharing tab in the Device Manager window.
Tap in the My shared folder: box, and then type in the directory
you would like to have as the Bluetooth Shared Folder. For the
Allegro, it is suggested to use C_Drive or C_Drive\C_MyDocs.
Then tap on OK or press ENTER.
Once OBEX is installed, and you have selected the Bluetooth Shared
Folder location, and bonded with the other Bluetooth device, you
can now transfer fi les between the devices.
1)
2)
3)
4)