Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 99)

-99-
4.2.65.6 access-list rate-limiter
Command:
access-list rate-limiter
rate-limiter Rate limiter
Rate limiter ID
Default:
Disable
Usage Guide:
To apply Rate Limiter ID for the ACL.
Example:
To apply ACL Rate Limiter ID 1 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list rate-limiter 1
4.2.65.7 access-list redirect interface
Command:
access-list redirect interface 10GigabitEthernet | GigabitEthernet
redirect Redirect frame to specific port
Default:
Disable
Usage Guide:
To redirect frames to specific Port.
Example:
To redirect GigabitEthernet X/X frames to GigabitEthernet 1/2.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list redirect interface GigabitEthernet 1/2