Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 124)

-124-
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lldp tlv-select management-address
4.2.65.55 lldp tlv-select port-description
Command:
lldp tlv-select port-description
lldp
LLDP configurations
tlv-select
To transmit which optional TLVs.
port-description
Enable/Dis able transmission of port description.
Default:
Enabled
Usage Guide:
To enable port-description of LLDP TLV for specific interface
Example:
To enable port-description of LLDP TLV for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # lldp tlv-select port-description
4.2.65.56 lldp tlv-select system-capabilities
Command:
lldp tlv-select system-capabilities
lldp
LLDP configurations
tlv-select
To transmit which optional TLVs.
system-capabilities
Enable/Disable transmission of system capabilities.
Default:
Enabled
Usage Guide:
To enable system-capabilities of LLDP TLV for specific interface
Example:
To enable system-capabilities of LLDP TLV for GigabitEthernet X/X