Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 360)

-360-
To display the SFP Transceiver information for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 capabilities
GigabitEthernet 1/1 Capabilities:
SFP Type: None
SFP Vendor name:
SFP Vendor PN:
SFP Vendor revision:
4.21.21 show interface statistics
Command:
show interface statistics [ { packets | bytes | errors |
discards | filtered | { priority [ ] } } ] [ { up | down } ]
show
Show running system information
interface
Interface status and configuration
statistics
Display statistics counters
bytes
Show byte statistics.
discards
Show discard statistics.
down
Show ports which are down
errors
Show error statistics.
filtered
Show filtered statistics.
packets
Show packet statistics.
priority
Queue number
up
Show ports which are up
Default:
N/A
Usage Guide:
To display the port statistics information.
Example:
To display the port statistics information (Byte statistics) for interface GigabitEthernet 1/1.
Switch # show interface GigabitEthernet 1/1 statistics bytes
Interface Rx Octets Tx Octets
---------------------- --------------- --- -------------- ----
GigabitEthernet 1/1 0 0