Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 146)

-146-
dpl
Specify drop precedence level
Specific drop precedence level or range
pcp
Specify PCP (Priority Code Point)
Specific PCP
dei
Specify DEI (Drop Eligible Indicator)
Specific DEI
Default:
Disabled
Usage Guide:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS for specific interface
Example:
To configure (QoS class, DP level) to (PCP, DEI) Mapping of QoS as below table for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos map cos-tag cos 1 dpl 1 pcp 6 dei 0
4.2.65.96 qos map tag-cos
Command:
qos map tag-cos pcp dei cos dpl
qos
Quality of Service
map
QoS Map/Table configuration
tag-cos
Map for tag to cos configuration
pcp
Specify PCP (Priority Code Point)
Specific PCP
dei
Specify DEI (Drop Eligible Indicator)
Specific DEI
cos
Specify class of service
Specific class of service or range
dpl
Specify drop precedence level
Specific drop precedence level or range
Default:
Disabled