Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 301)

-301-
Default:
None
Usage Guide:
To configure the Access of SNMP
Example:
To configure the Access (below table) of SNMP
Switch# configure terminal
Switch (confi g)# snmp-server access default_rw_group model v2c level priv read
default_view write default_view
4.2.209 snmp-server community
Command:
snmp-server community { v2c [ ro | rw ] | v3 [
] }
snmp-server Set SNMP server's configurations
community
Set the SNMP community
v2c
SNMPv2c
Community word
ro
Read only
rw
Read write
v3
SNMPv3
Community word
IPv4 address
IPv4 netmask
Default:
None
Usage Guide:
To configure the Read / Write / Source network Community of SNMP
Example:
To configure the Read / Write / Source network Community (below table) of SNMP