Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 279)

-279-
Example:
To enable the Port Aging
Switch# configure terminal
Switch (config)# port-security port-security aging
4.2.180 port-security aging time
Command:
port-security aging time <10-10000000>
port-security
Enable/disable port security globally
aging
Enable/d isable port security aging
time
Time in seconds between check for activity on learned MAC addresses
<10-10000000>
seconds
Default:
3600
Usage Guide:
To configure the Aging Period of Port Security
Example:
To configure the Aging Period (159) of Port Security
Switch# configure terminal
Switch (config)# port-security aging time 159
4.2.181 privilege
Command:
privilege { exec | configure | config-vlan | line | interface | if-vlan | ipmc-profile |
snmps-host | stp-aggr | dhcp-pool | rfc2544-profile } level
privilege
Command privilege parameters
config-vlan VLAN Configuration Mode
configure Globa l configuration mode
dhcp-pool DHCP Pool Configuration Mode
exec Exec mode
if-vlan VLAN Interface Mode
interface Port List Interface Mode