Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 381)

-381-
Rcvd: 2618 Messages, 0 Error
Sent: 2618 Messages, 0 Error
ICMP message statistics:
IPv4 ICMP Message: Echo Reply
Rcvd: 0 Packet
Sent: 2618 Packets
IPv4 ICMP Message: Echo
Rcvd: 2618 Packets
Sent: 0 Packet
4.21.50 show ip verify source
Command:
show ip verify source [ interface ( [ ] ) ]
show
Show running system information
ip
Internet Protocol
verify
verify command
source
verify source
interface
ip verify source interface config
Default:
N/A
Usage Guide:
To display the IP Source Guard configuration.
Example:
To display the IP Source Guard configuration for GigabitEthernet 1/1.
Switch # show ip verify source interface GigabitEthernet 1/1
Port Port Mode Dynamic Entry Limit
---- --------- --------------- ----
GigabitEthernet 1/1 enabled 1