Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 389)

-389-
4.21.59 show lacp
Command:
show lacp { internal | statistics | system-id | neighbour }
show
Show running system information
lacp
LACP configuration/status
internal
Internal LACP configuration
neighbour
Neighbour LACP status
statistics
Internal LACP statistics
system-id
LACP system id
Default:
N/A
Usage Guide:
To display the LACP mode information.
Example:
To display the LACP mode information.
Switch # show lacp internal
Port Mode Key Role Timeout Priority
-------------------- -------- ---- ------ ------- --------
Gi 1/1 Enabled Auto Active Fast 32768
Gi 1/2 Enabled Auto Active Fast 32768
Gi 1/3 Disabled Auto Active Fast 32768
4.21.60 show line
Command:
show line [ alive ]
show
Show running system information
line
TTY line information
alive
Display information about alive lines
Default:
N/A
Usage Guide:
To display the VTY information.
Example:
To display the VTY information.