Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 110)

-110-
4.2.65.27 green-ethernet energy-detect(GG)
Command:
green-ethernet energy-detect
green-ethernet Green ethernet (Power reduction)
energy-detect
Enable power saving for ports with no link partner.
Default:
N/A
Usage Guide:
To enable power saving for ports with no link partner
Example:
To enable power saving for ports with no link for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet energy-detect
4.2.65.28 green-ethernet short-reach(GG)
Command:
green-ethernet short-reach
green-ethernet Green ethernet (Power reduction)
short-reach
Enable power saving for ports which is connect to link partner with short cable.
Default:
N/A
Usage Guide:
To enable power saving for ports with short cable
Example:
To enable power saving for ports with short cable for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # green-ethernet short-reach