Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 130)

-130-
Usage Guide:
To configure MTU sizes for specific interface
Example:
To configure MTU sizes (9000) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mtu 9000
4.2.65.67 mvr immediate-leave
Command:
mvr immediate-leave
mvr
Multicast VLAN Registration configuration
immediate-leave
Immediate leave configuration
Default:
Disabled
Usage Guide:
To enable Immediate-leave of MVR for specific interface
Example:
To enable Immediate-leave of MVR for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # mvr immediate-leave
4.2.65.68 mvr name
Command:
mvr name type [receiver | source]
mvr
Multicast VLAN Registration configuration
name
MVR multicast name
MVR multicast VLAN name
type
MV R port role configuration
receiver
M VR receiver port