4 access-list policy, 5 access-list port-state – Interlogix NS4702-24P-4S-4X Command Line Guide User Manual

Page 98

-98-

4.2.65.4 access-list policy

Command:

access-list policy

policy Policy

Policy ID

Default:

Policy ID: 0

Usage Guide:

To configure Policy ID for the ACL.

Example:

To configure ACL Policy ID 1 for the GigabitEthernet X/X.

Switch# configure terminal

Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list policy 1

4.2.65.5 access-list port-state

Command:

access-list port-state

port-state Re-enable shutdown port that was shutdown by access-list module

Default:

Enable

Usage Guide:

To enable Port-state function for the ACL.

Example:

To configure ACL Port-state function for the GigabitEthernet X/X.

Switch# configure terminal

Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list port-state