Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 394)

-394-
T ransmit mode is enabled.
No loop.
The number of loops is 12390.
T ime of last loop is at 1970-01-01T14:58:28+00:00
S tatus is down.
4.21.67 show mac address-table
Command:
show mac address-table [ conf | static | aging-time | { { learning | count } [ interface
( [ ] ) ] } | { address [ vlan ] } |
vlan | interface ( [ ] ) ]
show
Show running system information
mac
MAC Address Table information
address-table
MAC Address Table
address
MAC address lookup
aging-time
Aging time
conf
User added static MAC addresses
count
Total number of MAC addresses
interface
Select an interface to configure
learning
Learn/disable/secure state
static
All static MAC addresses
vlan
Addresses in this VLAN
Default:
N/A
Usage Guide:
To display the MAC address table.
Example:
To display the MAC address table for VLAN 1.
Switch # show mac address-table vlan 1
Type VID MAC Address Ports
Static 1 3 3:33:00:00:00:01 Gig abitEthernet 1/1-25 10GigabitEthernet 1/1-4 CPU
Static 1 3 3:33:00:00:00:02 Gig abitEthernet 1/1-25 10GigabitEthernet 1/1-4 CPU
Static 1 3 3:33:ff:00:99:00 Giga bitEthernet 1/1-25 10GigabitEthernet 1/1-4 CPU
Dynamic 1 d4:3d:7e:fd:e3:ac Giga bitEthernet 1/21
Static 1 f f:ff:ff:ff:ff:ff Gig abitEthernet 1/1-25 10GigabitEthernet 1/1-4 CPU