Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 77)

-77-
4.2.41 erps <1-64> holdoff
Command:
erps <1-64> holdoff <
0-10000>
<1-64>
ERPS group number
<
0-10000> Holdof f time in ms
Default:
0
Usage Guide:
To configure the Hold Off Time for ERPS
Example:
To configure the Hold Off Time (178 ms) for ERPS(Profile 1)
Switch# configure terminal
Switch (config)# erps 1 holdoff 900
4.2.42 erps <1-64> major
Command:
erps <1-64> major port0 interface {10GigabitEthernet, GigabitEthernet}
port1 interface {10GigabitEthernet, GigabitEthernet} [ interconnect ]
<1-64>
ERPS group number
interconnect
Major ring is interconnected
Default:
0
Usage Guide:
To create a profile and configure the Major ERPS interface port 0, port 1.
Example:
To create a profile 1 an d configure the Major ERPS interface port 0(GigabitEthernet 1/1), port 1(GigabitEthernet 1/2)
without interconnected mode
Switch# configure terminal
Switch (config)# erps 1 major port0 interface GigabitEthernet 1/1 port1 interface
GigabitEthernet 1/2