Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 340)

-340-
4.18 ping
4.18.1 ping ip
Command:
ping ip [ repeat ] [ size ] [ interval ]
ping
Send ICMP echo messages
ip
IP (ICMP) echo
ICMP destination address
interval
Specify repeat interval
0-30; Default is 0
repeat
Specify repeat count
1-60; Default is 5
size
Specify datagram size
2-1452; Default is 56 (excluding MAC, IP and ICMP headers)
Default:
N/A
Usage Guide:
To run the IPv4 Ping function
Example:
To run the IPv4 Ping (192.168.0.78) function
Switch# ping ip 192.168.0.78
PING server 192.168.0.78, 56 bytes of data.
64 bytes from 192.168.0.78: icmp_seq=0, time=0ms
64 bytes from 192.168.0.78: icmp_seq=1, time=0ms
64 bytes from 192.168.0.78: icmp_seq=2, time=0ms
64 bytes from 192.168.0.78: icmp_seq=3, time=0ms
64 bytes from 192.168.0.78: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad