Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 105)

-105-
Example:
To configure auto duplex mode for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # duplex auto
4.2.65.18 end
Command:
end
end Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # end
Switch#
4.2.65.19 evc dei
Command:
evc dei colored | fixed
evc Ethernet Virtual Connections
dei
Setup DEI mode
colored
Allow policer to set DEI
fixed
Use classified DEI
Default:
Fixed