217 transport email authentication – Interlogix NS4702-24P-4S-4X Command Line Guide User Manual
Page 317
-317-
port
TCP port for TACACS+ server
TCP port number
timeout
Time to wait for this TACACS+ server to reply (overrides default)
Wait time in seconds
The shared key
Default:
None
Usage Guide:
To configure the Host of TACACS+ Server
Example:
To enable the Host (below table) of TACACS+ Server
Switch# configure terminal
Switch (config)# tacacs-server host Interlogix.com port 55 timeout 6 key 7788
4.2.217 transport email authentication
Command:
transport email authentication username
transport
Enable or disable transport email function.
Enable or disable transport email function.
authentication
configure SMTP authentication's username and password
User name allows letters, numbers and underscores
The ENCR YPTED (hidde n) user p assword. Notic e th e ENC RYPTED p assword will b e d ecoded by
system internally. You cannot directly use it as same as the Plain Text and it is not human-readable text
normally.
Default:
N/A
Usage Guide:
To configure SMTP authentication's username and password
Example:
To configure SMTP authentication's username ([email protected]) and password (456)
Switch# configure terminal
Switch (config)# transport email authentication username [email protected]
password 456