Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 109)

-109-
4.2.65.25 exit
Command:
exit
exit Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # exit
Switch (config)#
4.2.65.26 flowcontrol
Command:
flowcontrol off | on
flowcontrol Traffic flow control.
off
Disable flow control.
on
Enable flow control.
Default:
Disable
Usage Guide:
To enable Flow-control for specific interface
Example:
To enable Flow-control for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # flowcontrol on