Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 227)

-227-
4.2.103.8 history size
Command:
history size <0-32>
history Control the command history function
size
Set history buffer size
<0-32>
Number of history commands, 0 means disable
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# history size 1
4.2.103.9 length
Command:
length <0 or 3-512>
length Set number of lines on a screen
<0 or 3-512>
Number of lines on screen (0 for no pausing)
Default:
None
Usage Guide:
To configure displayed lines on a screen.
Example:
To configure displayed lines on a screen.
Switch# configure terminal
Switch (config)# line vty 1
Switch (config-line)# length 10