Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 366)

-366-
Example:
To display the ARP Inspection Configuration.
Switch # show ip arp inspection
ARP Inspection Mode : disabled
Port Port Mode Check VLAN Log Type
---- --------- -------- -- --------
GigabitEthernet 1/1 dis abled d isabled NONE
GigabitEthernet 1/2 dis abled d isabled NONE
4.21.30 show ip arp inspection entry
Command:
show ip arp inspection entry [ dhcp-snooping | static ] [ interface (
[ ] ) ]
show
Show running system information
ip
Internet Protocol
arp
Address Resolution Protocol
inspection
ARP inspection
entry
arp inspection entries
dhcp-snooping
learn from dhcp snooping
static
setting from static entries
interface
arp inspection entry interface config
Default:
N/A
Usage Guide:
To display the ARP Inspection entry.
Example:
To display the ARP Inspection entry.
Switch # show ip arp inspection entry