Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 96)

-96-
4.2.65 interface * | 10GigabitEthernet | GigabitEthernet
Command:
interface * | 10GigabitEthernet | GigabitEthernet
* All switches or All ports
GigabitEthernet
1 Gigabit Ethernet Port
10GigabitEthernet
10 Gigabit Ethernet Port
Default:
N/A
Usage Guide:
To enter the interface mode.
Example:
To enter the interface 10GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# interface 10GigabitEthernet 1/2
Switch (config-if) #
4.2.65.1 access-list action permit
Command:
access-list action permit
action
Access list action
Default:
Permit
Usage Guide:
To configure Permit for the ACL action.
Example:
To configure Permit ACL action for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list action permit