Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 278)

-278-
To configure the Power Over Ethernet Reboot Schedule (below table) for specific profile.
Switch# configure terminal
Switch (config)# poe-time-range profile1
Switch (config-poe-time-range)# reboot Mon 0 0
4.2.178 port-security
Command:
port-security
port-security
Enable/disable port security globally
Default:
Disabled
Usage Guide:
To enable the Port Security
Example:
To enable the Port Security
Switch# configure terminal
Switch (config)# port-security
4.2.179 port-security aging
Command:
port-security aging
port-security
Enable/disable port security globally
aging
Enable/d isable port security aging
Default:
Disabled
Usage Guide:
To enable the Port Aging