Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 378)

-378-
4.21.46 show ip route
Command:
show ip route
show
Show running system information
ip
Internet Protocol
route
Display the current ip routing table
Default:
N/A
Usage Guide:
To display the IP Routing table.
Example:
To display the IP Routing table.
Switch # show ip route
11.11.11.0/24 via 192.168.0.14
127.0.0.1/32 via 127.0.0.1
192.168.0.0/24 via VLAN1
224.0.0.0/4 via 127.0.0.1
4.21.47 show ip source binding
Command:
show ip source binding [ dhcp-snooping | static ] [ interface (
[ ] ) ]
show
Show running system information
ip
Internet Protocol
source
source command
binding
ip source binding
dhcp-snooping
learn from dhcp snooping
interface
ip source binding interface config
static
setting from static entries
Default:
N/A
Usage Guide:
To display the Static IP Source Guard Table.