Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 71)

-71-
4.2.30 dot1x guest-vlan
Command:
dot1x guest-vlan <1-4095>
<1-4095>
Guest VLAN ID used when entering the Guest VLAN.
Default:
1
Usage Guide:
To set the value of guest-vlan for Network Access Server
Example:
To set the value of guest-vlan(2) for Network Access Server
Switch# configure terminal
Switch (config)# dot1x guest-vlan 2
4.2.31 dot1x guest-vlan supplicant
Command:
dot1x guest-vlan supplicant
supplicant
The switch remembers if an EAPOL frame has been received on the port for the life-time of the port. Once the
switch considers whether to enter the Guest VLAN, it will first check if this option is enabled or disabled.
Default:
Disable
Usage Guide:
To allow all frames automatically entering guest-vlan for Network Access Server
Example:
To allow all frames automatically entering guest-vlan for Network Access Server
Switch# configure terminal
Switch (config)# dot1x guest-vlan supplicant