199 rmon alarm – Interlogix NS4702-24P-4S-4X Command Line Guide User Manual
Page 295
-295-
4.2.199 rmon alarm
Command:
rmon alarm
ifInDiscards | ifInErrors | ifInUnknownProtos | ifOutOctets | ifOutUcastPkts |
ifOutNUcastPkts | ifOutDiscards | ifOutErrors }
{ absolute | delta } rising-threshold
[
-2147483648-2147483647> [
both ] }
rmon Remote Monitoring
alarm Configure an RMON alarm
MIB object to monitor
ifInDiscards
The number of inbound packets that are discarded even the packets are normal
ifInErrors
The number of inbound packets that contained errors preventing them from being deliverable to a
higher-layer protocol
ifInNUcastPkts
The number of broad-cast and multi-cast packets delivered to a higher-layer protocol
ifInOctets
The total number of octets received on the interface, including framing characters
ifInUcastPkts
The number of uni-cast packets delivered to a higher-layer protocol
ifInUnknownProtos
The number of the inbound packets that were discarded because of the unknown or un-support
protocol
ifOutDiscards
The number of outbound packets that are discarded event the packets is normal
ifOutErrors
The The number of outbound packets that could not be transmitted because of errors
ifOutNUcastPkts
The number of broad-cast and multi-cast packets that request to transmit
ifOutOctets
The number of octets transmitted out of the interface, including framing characters
Sample interval
absolute
Test each sample directly
delta
Test delta between samples
rising-threshold
Configure the rising threshold
rising threshold value
Event to fire on rising threshold crossing
falling-threshold
Configure the falling threshold
falling threshold value
Event to fire on falling threshold crossing
both
Trigger alarm when the first value is larger than the rising threshold or less than the falling threshold (default)
falling
Trigger alarm when the first value is less than the falling threshold
rising
Trigger alarm when the first value is larger than the rising threshold
Default:
None