Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 157)

-157-
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree auto-edge
4.2.65.114 spanning-tree bpdu-guard
Command:
spanning-tree bpdu-guard
spanning-tree
Spanning Tree protocol
auto-edge
Auto detects edge status
Default:
Disabled
Usage Guide:
To enable BPDU Guard of CIST Normal Port Configuration for specific interface
Example:
To enable BPDU Guard of CIST Normal Port Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree bpdu-guard
4.2.65.115 spanning-tree edge
Command:
spanning-tree edge
spanning-tree
Spanning Tree protocol
edge
Ed ge port
Default:
Non-Edge
Usage Guide:
To enable edge port of CIST Normal Port Configuration for specific interface
Example:
To enable edge port of CIST Normal Port Configuration for GigabitEthernet X/X