Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 401)

-401-
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address VID State Added Age/Hold Time
----------------- ---- ---------- -------- ----------------- -------------
4.21.77 show port-security switch
Command:
show port-security switch [ interface ( [ ] ) ]
show
Show running system information
port-security
port-security
switch
Show Port Security status
interface
Search by port
Default:
N/A
Usage Guide:
To display the status of Port Security.
Example:
To display the status of Port Security.
Switch # show port-security switch interface GigabitEthernet 1/1
Users:
L = Limit Control
8 = 802.1X
D = DHCP Snooping
V = Voice VLAN
Interface Users State MAC Cnt
----------------------- ----- ------------- -------
GigabitEthernet 1/1 ---- No users 0