Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 267)

-267-
Example:
To configure profile name (6) of MVR VLAN (5)
Switch# configure terminal
Switch (config)# mvr vlan 5 name 6
4.2.164 network-clock clk-source aneg-mode
Command:
network-clock clk-source aneg-mode { master | slave | forced }
network-clock
net work-clock
clk-source
clk-source - commands related to a specific clock source.
Clock source number
aneg-mode
Sets the preferred negotiation.
forced Activate forced slave negotiation
master Activate prefer master negotiation
slave Activate prefer slave negotiation
Default:
None
Usage Guide:
To configure preferred negotiation of network-clock
Example:
To configure preferred negotiation (slave) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 aneg-mode slave
4.2.165 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A