Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 91)

-91-
Internal VLAN ID
interface
Setup NNI
learning
Setup learning
policer
Policer (ingress bandwidth profile)
Policer ID
List of VLANs
discard
Map to policer discarding all frames
none
Map to policer allowing all frames
Default:
0
Usage Guide:
To update an ID for Ethernet Virtual Circuits (EVC).
Example:
To update Ethernet Virtual Circuits (EVC identifier: 1, EVC VLAN ID: 10).
Switch# configure terminal
Switch (config)# evc update 1 vid 10
4.2.57 exit
Command:
exit
Default:
N/A
Usage Guide:
To exit configure terminal mode.
Example:
To exit configure terminal mode.
Switch# configure terminal
Switch (config)# exit
#