Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 78)

-78-
4.2.43 erps <1-64> mep
Command:
erps <1-64> mep port0 sf aps port1 sf
aps
<1-64>
ERPS group number
Index of Port 0 SignalFail MEP
Index of Port 0 APS MEP
Index of Port 1 SignalFail MEP
Index of Port 1 APS MEP
Default:
0
Usage Guide:
To configure ERPS Instance Data for specific ERPS profile.
Example:
To configure ERPS Instance Data(Port0: SF MEP = 2, APS MEP = 1. Port1: SF MEP = 4, APS MEP = 3) for specific
ERPS
profile(1).
Switch# configure terminal
Switch (config)# erps 1 mep port0 sf 2 aps 1 port1 sf 4 aps 3
4.2.44 erps <1-64> mep
Command:
erps <1-64> revertive
<1-64>
ERPS group number
W ait-to-restore time in minutes
Default:
0
Usage Guide:
To configure WTR time for specific ERPS profile.
Example:
To configure WTR time(5 minuites) for specific ERPS profile 1.
Switch# configure terminal
Switch (config)# erps 1 revertive 5