Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 300)

-300-
4.2.207 snmp-server
Command:
snmp-server
snmp-server Set SNMP server's configurations
Default:
Enabled
Usage Guide:
To enable the SNMP Service
Example:
To enable the SNMP Service
Switch# configure terminal
Switch (config)# snmp-server
4.2.208 snmp-server access
Command:
snmp-server access model { v1 | v2c | v3 | any } level { auth | noauth |
priv } [ read ] [ write ]
snmp-server Set SNMP server's configurations
access
access configuration
group name
model
security model
any
any security model
v1
v1 security model
v2c
v2c security model
v3
v3 security model
level
security level
auth
authNoPriv Security Level
noauth
noAuthNoPriv Security Level
priv
authPriv Security Level
read
specify a read view for the group
read view name
write
specify a write view for the group
w rite view name