Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 138)

-138-
Example:
To configure maximum power (29 watts) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe power limit 29
4.2.65.81 poe priority
Command:
poe priority { low | high | critical }
poe
Power Over Ethernet.
priority
Interface priority.
critical
Set priority to critical.
high
Set priority to high.
low
Set priority to low.
Default:
2
Usage Guide:
To configure interface priority of PoE for specific interface.
Example:
To configure interface priority (low) of PoE for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # poe priority low
4.2.65.82 poe time-range
Command:
poe time-range { profile1 | profile2 | profile3 | profile4 }
poe
Power Over Ethernet.
time-range
To bind a PoE time-range to the corresponding port.
profile1
The profile name of the PoE time-range to be bound to the port.
profile2
The profile name of the PoE time-range to be bound to the port.
profile3
The profile name of the PoE time-range to be bound to the port.
profile4
The profile name of the PoE time-range to be bound to the port.