Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 132)

-132-
4.2.65.70 network-clock synchronization ssm
Command:
network-clock synchronization ssm
network-clock
network-clock
synchronization
SSM enable/disable.
ssm
SSM enable/disable.
Default:
Disable
Usage Guide:
To enable SSM of SyncE for specific interface
Example:
To enable SSM of SyncE for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # network-clock synchronization ssm
4.2.65.71 no
Command:
no
no
Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function for specific interface
Example:
To enable the function (network-clock synchronization ssm) for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # no network-clock synchronization ssm