Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 353)

-353-
4.21.11 show dot1x status
Command:
show dot1x status [ interface ( [ ] ) ] [ brief ]
show
Show running system information
dot1x
IEEE Standard for port-based Network Access Control
status
Shows dot1x status, such as admin state, port state and last source.
interface
Interface
brief
Show status in a brief format
Default:
N/A
Usage Guide:
To display the IEEE 802.1X status.
Example:
To display the All of IEEE 802.1X status for brief.
Switch # show dot1x status
GigabitEthernet 1/1 :
---------------------
Admin State Port State Last Source Last ID
------------------ ------------ --------- -------------- --- -------------
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Curre nt Guest VLAN
-------------------- -------------------- --------------------
- - -
GigabitEthernet 1/2 :
---------------------
Admin State Port State Last Source Last ID
------------------ ------------ --------- -------------- --- -------------
Force Authorized Globally Disabled - -
Current Radius QOS Current Radius VLAN Curre nt Guest VLAN
-------------------- -------------------- --------------------
- - -