Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 252)

-252-
4.2.138 mep lt
Command:
mep
lt { { mep-id } | { mac } } ttl
mep Maintenance Entity Point
The MEP instance number.
lt
Link Trace
Priority in case of tagged OAM. In the EVC domain this is the COS-ID.
mac
Link Trace target unicast MAC to be used in case of LT against MIP.
Link Trace target unicast MAC value.
mep-id
Peer MEP-ID for Link Trace target unicast MAC. The MAC is taken from peer MEP MAC database.
Peer MEP-ID value.
ttl
Time To Live.
T ime To Live value
Default:
Usage Guide:
To configure Link Trace of MEP.
Example:
To configure Link Trace of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 lt 4 mac 11-3A-15-A3-53-44
4.2.139 mep meg-id
Command:
mep
meg-id { itu | itu-cc | { ieee [ name ] } }
mep Maintenance Entity Point
The MEP instance number.
meg-id
The ITU/IEEE MEG-ID
The MEG-ID string. This is either the IT U MEG-ID or the IEEE Short MA, depen ding on the selected
MEG-ID format. The ITU max. is 13 characters. The ITU-CC max. is 15 characters. The IEEE max. is
16 characters..
ieee The MEG-ID (Short MA Name) has IEEE Character String format. The meg-id max. is 16 characters.