Interlogix NS4702-24P-4S-4X Command Line Guide - Manual (Page 305)

-305-
Example:
To exit current mode.
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)#exit
Switch (config)#
4.2.212.4 host
Command:
host [ | | ] { informs |
traps }
host
host configuration
hostname of SNMP trap host
IP address of SNMP trap host
IP address of SNMP trap host
UDP port of the trap messages
informs
Send Inform messages to this host
traps
Send Trap messages to this host
Default:
None
Usage Guide:
To configure Trap Host of SNMP
Example:
To configure Trap Host (below table) of SNMP
Switch# configure terminal
Switch (config)# snmp-server host Interlogix
Switch (config-snmps-host)# host Interlogix.com 66 informs